Authorized for use with USAF M18

The Modular Handgun Holster Air Force, MHHAF, is a complete system designed for the USAF M18 Modular Handgun System.

The model 7390 holster sleeves provide retention automatically upon holstering without the need of any activation or manipulation of any devices.  The 7390 holster sleeve conforms to the shape of the handgun and ensures the handgun is securely held within the holster.

The 7390 holster sleeve can be configured to provide two different levels of retention.  With the ALS®

guard in place, it is a level II holster, or by removing the ALS® guard it has Level I protection provided by the ALS® locking block that automatically locks into the ejection port of the MHS upon holstering the weapon.  Retention™ is deactivated with the thumb with one fluid motion by attaining a proper firing grip.

The model 7390 holster sleeve comes in both right and left-handed versions. The 7390 holster sleeve allows for drawing and re-holstering with one hand and without the need for looking at the holster promoting situational awareness.

The model 7390 holster sleeve is constructed with SafariSeven™, a proprietary, lightweight, state-of-the-art nylon blend that has mechanical and physical properties such as high mechanical strength, an excellent balance of stiffness and toughness, a good high-temperature performance, and resistance to a wide range of chemicals. SafariSeven™ blocks the absorption of blood-borne pathogens and other biological fluids and is fungus and fire-resistant. Additionally, it will not be degraded by CBRN decontamination materials, insect repellants, seawater, or commonly used lubricants. Finally, it is tolerant of extreme high and low temperatures, structurally sound from 300 degrees to minus 50 degrees Fahrenheit.

Mounting screws for the model 7390 holster sleeve and QAS are standard combination #2 Phillips/Slot head screws to allow for the use of a common multi-tool.

Once the initial configuration is complete, no tools are necessary to move the holsters between different platforms when utilizing the QAS, as it is fluid and intuitive. This movement can be completed between any of the requested platforms (leg, hip, or chest) without the need for tools in fewer than twenty (20) seconds.

745BL belt clip consists of 2 parts the Belt clip and the QLS-22 receiver plate.  This clip is used in two requirements in the holster system.  It is used in the belt and concealment requirements. The clip can be worn on the pants belt or a gun belt for concealment or non-tactical carry.  The belt clip is also used as the attachment point for the leg drop and shroud.  The QLS allows for quick transfer of gear between attachment points.  This clip allowed either the holster or the Leg drop to be attached to the belt clip by using the QLS Fork that is attached to both.

6075UBL is a Low Ride Universal belt loop for 2-inch belts.  The low ride universal belt loop has a QLS receiver plate attached for easy attachment of the holster sleeve to the belt.

The Model 77 Double Magazine Pouch is designed to carry two M-18 magazines.  A magazine tension screw located between the two pouches allows for easy retention adjustment. It’s constructed of rugged SafariLaminate™. The model 77 magazine comes with the ELS system attached to the 744BL equipment belt mount. By using the ELS system the magazine pouch can be moved from the belt to the MOLLE mounts easily and quickly. This Model 77 Magazine pouch will fit the 21 round magazines for the M-18.

The Model 76 is a standard single magazine pouch that is designed to carry one magazine.  The 76 rides in a vertical position on the belt and carries the magazine in a butt-up position for easy access. It’s constructed of rugged SafariLaminate™.   The model 76 magazine comes with the ELS system attached to the 744BL equipment belt mount. By using the ELS system the magazine pouch can be moved from the belt to the MOLLE mounts easily and quickly. This Model 76 Magazine pouch will fit the 21 round magazines for the M-18.

ELS kit contains ELS 34 Locking Fork and the ELS 35 Receiver Plate. These models can be used for the quick attachment and detachment of any of Safariland’s Tactical Accessories. Each ELS Kit includes (2) ELS 34 Locking Forks and (2) ELS 35 Receiver Plates. All required hardware is included in the kit

Kit contains (2) MOLLE Accessory with MS35 for mounting equipment to MOLLE.  The MLS-16 Accessory Locking Fork mounts directly to the back of the MS35 for attachment to MOLLE.  The MLS-16 and the MS35 have locking rings that allow for the angle of the ELS to be moved in a 360-degree adjustment to allow for the angle of wear that the end-user requires.  The MOLLE mount requires no tools to attach to MOLLE webbing.

MOLLE Accessory for with QLS-22.  The MLS-16 Accessory Locking Fork mounts directly to the back the QLS 22 for attachment to MOLLE.  The MLS-16 and the QLS-22 have locking rings that allow for the angle of the QLS to be moved in a 360-degree adjustment to allow for the angle of wear that the end-user requires.  The MOLLE mount requires no tools to attach to MOLLE webbing.